Re: HP Laserjet Pro 400 MFP M425 does not print
You should try the new firmware, since there were some changes made for sleep....
View ArticleRe: The Color Laserjet CM2320nf MFP screen viewer doesn't work
Hello: It sounds like your product has probably experienced a hardware failure. However there are some things you can do to find a a bit more about it. The exclamation point usually means that...
View ArticleRe: Trying to print multiple copies of custom size paper. After each page,...
If you have not set the tray up for the custom paper size- the engine will be expecting to print on the default your printer is set to (letter, A4, whatever). Set the custom size in the tray if you...
View ArticleRe: How to change configurations - from wired to network
The M276 software also has a "reconfigure my device" option in the Programs Group. Start-> All Programs->HP->M276->Reconfigure my Device. Choose this option and it will let you either...
View ArticleRe: 52 scanner error message on 2840 all in one printer
I just wanted to add, for the benefit of skapadia_in, that a 52 scanner error refers to the laser scanner in the print engine for all LaserJet printers. The image scanner (copier/fax) is not the cause...
View ArticleRe: HP LaserJet Pro 400 Color MFP M475dw goes offline
Try going to the Control Panel of your M475 and go to the Service Menu. Go to Smart Install and turn it OFF. Then try rebooting your XP machine again.
View ArticleRe: LaserJet Pro 300 MFP M375nw Poor Performance Speed - Constantly Cleaning
Hi, Make sure the print jobs are matched to the tray settings in the papar trays. If your default paper for your product is Letter- and you are printing an A4 job from your PC- the printer will...
View ArticleRe: Configuring Low toner alert on MFP M475
Hi, There are no toner email alerts for the M75.
View ArticleSetup - Need new printer claim code.
Can I get a new printer claim code? In trying to set up my new all-in-one, I printed the setup instructions on recycled paper and - because this printer is new to me - I had my paper in upside-down....
View ArticleRe: Setup - Need new printer claim code.
Hi You can find information in this link about printer claim code. " Return to the Web Services menu on the printer control panel to remove and re-enable Web Services, and then print another...
View ArticleRe: Windows 8.1 won't recognize LaserJet 3055 scanner
The 3055 will only show up as DOT4001 or USB001. It doesn't have a separate USB interface for the scanner. If you are connected via USB001 then you won't have any way of getting a scanner. DOT4001...
View ArticleRe: Where can I get MIB for HP OfficeJet X476dw?
Search for rfc3805. It contains the information that you need. In that document you can find the meaning of the OIDs. Your OID 1.3.6.1.2.1.43.11.1.1.X.1.Y (I substituted in X and Y) will select the...
View ArticleColor LaserJet CM4540 -58.00.04 error
Now receiving a 58.00.04 error on this CM4540 printer (see attached). Says to power off and then back on. Problem still exists.
View ArticleRe: Color LaserJet CM4540 -58.00.04 error
In general, that error is related to the power supply. Please ensure proper cabling for 110v/220v and ensure all cables are completely plugged in. Other related info can be found in this part of our...
View ArticleRe: Hp Envy 120 e-All-In-One Printer crash error C4EBA641 + scan
Hi, So when you power the printer on you get the blue screen with alphanumeric value correct? Please insure the printer is plugged in directly to a wall outlet and try powering back on. Does the error...
View ArticleRe: Color LaserJet CM4540 -58.00.04 error
There is also a message on the control panel that says "Tray 2 lifting" but the tray does not move.
View ArticleRe: Color LaserJet CM4540 -58.00.04 error
One of the standard resets for many devices is to unplug from the wall for about 45 seconds. Then replug and boot. Please try that. ThanksSamAn HP Employee..
View ArticleRe: Color LaserJet CM4540 -58.00.04 error
Hello, Reolution for your issue 58.00.04 error,Cause : The product has experienced a low voltage power supply unit malfunctionRecommended action : Turn the product off, then on. If the error persists,...
View ArticleRe: 49.4C20 error, on my HP CM3530fsMFP
Hello Chris, The 49.4C02 can be defined as a bad communication between the formatter card and the Firmware caused by a damaged or corrupted file which still blocked on the print queue "Spooler" while...
View ArticleRe: HP Officejet Pro 8600 Scan problem
Hello, Many thanks for your quick reply. I can use both the fax and print function. It is with the scan function that I am having problem. I have attached the message I'm having. Best Regards,Salim.
View Article