Re: Network Laserjet 400 will not wake up
James,We are trying a similar approach. We have a script pinging the printers periodically in an attempt to the keep the network connection alive. Too early to tell if it is working, though.
View ArticleRe: HP OJP-x451dn Error 0x6FD0613 Problem with ink system
Hello, first thing I would check on all of your machines is the serial numbers, what you are looking for is to see if there is a 35 within the serial. Should you find one, I would suggest letting HP...
View ArticleRe: Hp laserjet ent.500 MFP m525 Control Panel
Hello, I would replace the control panel, and once you replace it, make sure that you have sleep mode turned off, as well as, screen inactivity setting turned all the way to max. I have seen this issue...
View ArticleRe: HP Laserjet CM1312nfi MPF - won't scan to Window 8.1
I have the same problem. Also the same issues with the software thinking I'm using Windows Vista (I'm on a Lenovo Twist that came with Windows 8.) Has anyone else come up with a solution? I'm in the...
View ArticleRe: How do I set up my new Officejet Pro 8600 Plus print to print on 4x6...
How do I set up my Officejet Pro 8600 to print on 4x6 photo paper?
View ArticleCM2320fxi MFP, original cartridges troubles
Hi, this printer have about 4 years, but since 1 year ago every single new colour cartridge - always original HP - doesn't work properly: after 40-50 colour copy - very often not full images but only...
View ArticleHP officejet 4500 model G510a parts location
Doessomeone has the complete parts guid of the hp deskjet 4500 (Model G510a) . Because I don't know the location of this one. See attached pictures.
View ArticleOfficejet X576 Scanning issues
We have a client with an Officejet X576 multifunction. They scan a lot of files and email them. However, when they scan to the computer with the HP scan software the files are very large. They have...
View ArticleRe: LaserJet Pro 400 - M475dw, not recognising USB stick
Sounds like a problem with the USB reader. This would be a good one to phone into HP Support if your printer is still covered by warranty. An easily reproducable and isolated problem like this should...
View ArticleRe: HP officejet 4500 model G510a parts location
What you need is a Service Manual. Unfortunetly Service Manuals are privilaged materials and restricted to HP Certified repair technicians. We cannot link Service Manuals on the forums. However, I'd...
View ArticleHP 3530 MFP and Fax module
I have the hp cm3530 mfp and fax module.Myquestion: how to install thefaxmodule in the 3530Do you have a pdf for illustartion?Thanks
View ArticleRe: wireless suddenly stopped working
it appears i need to type in new address. how can i find it.
View ArticleHP Laserjet 4345 MFP
HP Laserjet 4345 MFP Printer prints blank therefore the scanner as the port. What you may fail ?. The cartridge is original and is proven.
View ArticleRe: HP 3530 MFP and Fax module
The fax module will slide into a slot near the opening for the fax port. It should be a simple plug and play kind of an installation. The hard part is opening up the chassis to expose the slot. If...
View ArticleRe: HP Laserjet 4345 MFP
First try a print engine test. This will bypass the formatter. If you are looking at back of printer there is a small slot between the vents on left side. Push a toothpick or plastic stick into...
View ArticleRe: Full solution software for CM2320nf hangs
I am soooo sorry it has taken me so long to get back. Work took me away for a while, and I've only had time to return home and fall into bed, only to get up at 5am and start over. I appreciate your...
View ArticleRe: LaserJet Pro 400 - M475dw, not recognising USB stick
Hello, I found the reset instructions http://h30499.www3.hp.com/t5/Multifunction-and-All-in-One/Laserjet-Pro-200-M276-NVRAM-Reset-Cold-Reset/td-p/6016645#.U-eewfldV8k Many thanks - but it didn't work....
View ArticleHP LaserJet 400 color MFP scan to network folder settings always change back
On my HP LaserJet 400 color MFP I configured 4 network folders for the 'scan to network folder'. Every time I want to scan something, I see that the default setting for the scan source is 'flatbed...
View Article