Re: HP 475 MFP Stuck at black bios screen, sometimes stuck initializing
I'd pay attention to the noises as the device boots. If something is failing a hardware test then it could hold up the whole boot process. Although normally when there is a hardware problem the...
View ArticleDim pictures on mij CM2320nf
I havea2320nfprinter,itprintsvery vague/Dim.Does anyone haveany experience with this. Thanks, Henk
View ArticleRe: LaserJet M570dn (CZ271A) / MS Patchday November 2013 turns Send Fax...
Further message Friday 18 April 2014 from HP Support: "This is in regards to your chat regarding the HP LaserJet Pro 500 color MFP M570dw Printer. For reference, your Case ID is 4646865779. We can...
View ArticleRe: Dim pictures on mij CM2320nf
If the scan quality is the same between the ADF and the glass then your scanner is probally going bad on you. The only replacement option would be to replace the entire scanner assembly. At that...
View ArticleRe: HP 2840m printer issues
Your cartridge is most likely defective. Replace or return it under the warranty if you have that option. Lines are generally the result of a bad toner cartridge. Smears are generally more of a fuser...
View ArticleRe: Service 49 Error when trying to fax from HP LaserJet 400
49 service errors are normally the result of a bad job stuck on the printer or on the print server. Normally its best to power down the printer, clear any print queues, and try again. When that...
View ArticleRe: HP colour laserjet CM2320fxi MFP - scan to email troubles
No and No. The memory allocated to the address book on the printer is limited to 50 entries (See page 179 of the CM2320 User Guide). For faxing its 120 entries. That is all you get. However, you can...
View ArticleRe: please help hp 576dw
The print center where you brought the printer seems like a good place to go for help : ) If your printhead is bad then replace it or have the print center do it for you. Nothing else we can do to...
View ArticleRe: HP 2840m printer issues
Since this is a color printer with 4 toners and a carousel I doubt one of the toners is the issue. I would think the problem is with the image drum kit or the fuser. Just remove the drum kit and open...
View ArticleRe: HP CM1017 - partial scan
John, thanks for the reply. you are right, I tried a 3rd party scan and it did the whole page. I tried un-installing and re-installing HR Director (actually twice) and it still isn't working. Weird?
View ArticleRe: M425DN becomes unresponsive when exiting sleep mode
I am having the same problem that started when I upgraded to latest firmware version 20131216 datedusing the 10 Jan 2014. I am using the LAN interface. The HP engineer's solution doesn't exist in this...
View ArticleHP LaserJet Pro 400 color MFP M475 Control Panel
Hi. We have the HP LaserJet Pro 400 color MFP M475 and we are facing the same problem for the second time the Touch Control Panel its not responding perfectly. we sent it to HP maintenance center after...
View ArticleFreeze often after initialising process, Printer is new - LJ Pro 400 color...
Hi to all, When i turn on my printer, it freeze at statup just after initialising process : The control panel is blankOnly "?" icon, green power led and /!\ orange led is visible Workaround :Power off...
View ArticleLaserjet M1212nf MFP Not sending/receiving fax
I have a problem with my fax : It connects, dials the number, connects to the receiving party, begins beeping, and then it is like there is no answer form the receiving party.I checked the phone line,...
View ArticleRe: Freeze often after initialising process, Printer is new - LJ Pro 400...
Printer is under warranty. Contact HP customer care and have them solve the issue for you over the phone or they will offer other options to get it repaired.
View ArticleRe: Freeze often after initialising process, Printer is new - LJ Pro 400...
I will do that, but i'm very sad to have some issue for a new printer.Is it possible to have some log details about startup failure on this printer ?It can be usefull for troubleshoot this issue over...
View ArticleRe: officejet installation says: XP is no longer supported
It would help if you posted the model number of your printer.
View ArticleProblem with the Color Laserjet CM 2320 fxi
Hey boys,First I want to say sorry for my bad english, but I'm a german guy which has a big problem with his printer.On the Germany private user board no one can help me.I have this printer for two...
View ArticleRe: HP CM1017 - partial scan
That confirms there is a software conflict on that computer between the scanner and the HP scanning application. Its going to be tough to isolate it further if the usual uninstall and reinstall does...
View ArticleRe: Problem with the Color Laserjet CM 2320 fxi
Hello, Normally when a printer interupts a job and asks the user to do something it is because the paper properties of the document do not match those of the tray it is printing from. The printer...
View Article