You could be having a size and type mismatch. In other words the default paper for the printer is lets say letter, plain. When you send a photo job the printer is asking for lets say letter, photo. When you remove the paper and put in the paper again, the printer thinks you have now put in photo paper and prints the one page. Again if more than one page is required by removing the paper and putting back in, the printer now thinks you have installed photo paper again. I know this action takes place on laser printers that have a manual feeder where it asks for the type of paper to be loaded in tray 1. If you press the ok button it ask to use lets say plain from the paper tray and will only print one sheet and asks the same message again. If you have a way to set the paper in the tray to be the correct size and the type photo (glossy or whatever) it may work for you.
↧